Saviynt Forums

PA · ‎05/05/2023

Hello,

I am trying to clone our Admin Sav role to RO admin for our new user. All the access looks fine but the user does not have access to any of the Saviynt modules. He can see the home screen though.

Is there any other configurations I should be aware of that is denying the access to the modules?

dgandhi · ‎05/05/2023

In connection, under Default Sav Role, add the new READ ONLY SAV Role that you created.

Also can you make sure that you enabled (READONLY ROLE is enabled) below config in the SAV Role.

Thanks

Thanks,
Devang Gandhi
If this reply answered your question, please Accept As Solution and give Kudos to help others who may have a similar problem.

PA · ‎05/05/2023

Hi Devang, can you please specify what connection you are referring to? The read only button is enabled on the newly created role.

PA · ‎05/05/2023

I believe you are referring to this connection.

dgandhi · ‎05/05/2023

Yes, can you add your new sav role and check the behavior.

As best practice, please make the changes in DEV and validate it before doing it in Prod directly.

Thanks

Thanks,
Devang Gandhi
If this reply answered your question, please Accept As Solution and give Kudos to help others who may have a similar problem.

PA · ‎07/01/2023

Hi Devang,

With default sav roles mentioned as read-only admin on the connections, the read-only admin user can access the connections with default role mentioned and security system/endpoint associated with these connections. But they are not able to see the security system and endpoint for disconnected applications. Is there a way to make these visible to them?

naveenss · ‎07/02/2023

Hi @PA ,

For disconnected applications, did you try making the read only admin user as the "Owner" of the endpoint?

Regards,
Naveen Sakleshpur
If this reply answered your question, please click the Accept As Solution button to help future users who may have a similar problem.

Saviynt Forums

Clone Sav Role Admin to RO Admin